Procore Technologies
or
×

Procore Safety Qualified: Silica Exposure

Procore Safety Qualified: Silica Exposure

About this course

Learning Format:

Live Presentation Recording

We realize that most users will not have the ability to complete all of the training modules in a single session, which is why we've designed a flexible and modular course where you can learn at your own pace. Complete modules at your own pace and resume your training at any time. 

Estimated Time for Completion: 2 hours

Note: You must complete the 3 courses of the 2019 Procore Safety Qualified series to apply for your 2019 Procore Safety Qualified hard hat sticker. 


Part 1: Managing Silica Exposure in Construction
Description:

In this course you will be introduced to the hazards of silica exposure. You will learn about permissible levels of silica exposure and also methods to limit exposure. 

Learning Objectives:
    • Define crystalline silica, what it is, and where it is found.
    • Determine the difference between inhalable and respirable crystalline silica.
    • Identify the diseases that are caused by respirable silica overexposure.
    • Describe the methods to limit exposure to respirable silica.

Part 2: Creating a Silica Exposure Control Plan
Description:

In this course you will learn how to create a silica exposure control plan, a mandatory component of the OSHA regulations for silica exposure. 

Learning Objectives:
    • Identify who is required to have a written silica exposure control plan.
    • Determine when a respirator is needed and how to properly incorporate respirator use into your exposure control plan.
    • Learn techniques for restricting access in order to limit exposure to silica on your job site.
    • Understand how to better control silica exposure during clean up and housekeeping procedures on the job. 

Part 3: Alternative Silica Exposure Control Procedures
Description:

When conventional exposure control procedures aren't possible, what can you do? This course details alternative silica exposure control procedures and how they protect people.

Learning Objectives:
    • Define when an alternative exposure control procedure is required.
    • Describe how these alternative exposure procedures protect people from over exposure to respirable crystalline silica.
    • Identify the tasks that are not covered in Table 1 that require alternative exposure control procedures
    • Calculate Permissible Exposure Levels based on variable daily exposure.

Continuing Education Credit:

This course has been approved by these organizations and associations.

Course Titles: Procore Safety Qualified: Managing Silica Exposure in Construction, Procore Safety Qualified: Creating a Silica Exposure Control Plan, Procore Safety Qualified: Alternative Silica Exposure Plan
Course Number: PC-330, PC-331, PC-332
Delivery Name: Procore Technologies
Curriculum Group Name: AIA Providers
Credit: 1 AIA LU each

Procore's Continuing Education courses may fulfill state licensing requirements. When a course is completed, a certificate of completion is provided. It is up to the construction professional to submit their certificates of completion to their state licensing board to request credit for participating in a Procore Continuing Education course. 

This course is a 2019 Construction Safety Week resource

Curriculum

  • Managing Silica Exposure in Construction
  • Managing Silica Exposure in Construction: Introduction
  • Defining the Hazard
  • Understanding Respirable Crystalline Silica
  • Quiz 1
  • Permissible Exposure Levels
  • Quiz 2
  • The Written Plan
  • Methods for Limiting Exposure
  • Quiz 3
  • Restrict Access
  • Engineering Controls
  • Quiz 4
  • Tasks Not in Table 1
  • Quiz 5
  • Training and Additional Considerations
  • Conclusion
  • Final Quiz
  • Creating a Silica Exposure Control Plan
  • Creating a Silica Exposure Control Plan: Introduction
  • Who Needs a Plan?
  • Quiz 1
  • Defining the Tasks
  • Quiz 2
  • Respirator Use
  • Quiz 3
  • The Competent Person
  • Quiz 4
  • Restricting Access During Operations
  • Clean-up and Housekeeping
  • Quiz 5
  • Training
  • Quiz 6
  • Conclusion
  • Final Quiz
  • Alternative Silica Exposure Control Procedures
  • Alternative Silica Exposure Control Procedures: Introduction
  • Understanding the Alternatives to Table 1
  • Quiz 1
  • Measuring Exposure Levels
  • Quiz 2
  • Using Existing Objective Data
  • Quiz 3
  • Pulling It All Together
  • Quiz 4
  • Conclusion
  • Final Quiz
  • Congratulations! You've completed a Procore Continuing Education course!
  • We want to hear from you!

About this course

Learning Format:

Live Presentation Recording

We realize that most users will not have the ability to complete all of the training modules in a single session, which is why we've designed a flexible and modular course where you can learn at your own pace. Complete modules at your own pace and resume your training at any time. 

Estimated Time for Completion: 2 hours

Note: You must complete the 3 courses of the 2019 Procore Safety Qualified series to apply for your 2019 Procore Safety Qualified hard hat sticker. 


Part 1: Managing Silica Exposure in Construction
Description:

In this course you will be introduced to the hazards of silica exposure. You will learn about permissible levels of silica exposure and also methods to limit exposure. 

Learning Objectives:
    • Define crystalline silica, what it is, and where it is found.
    • Determine the difference between inhalable and respirable crystalline silica.
    • Identify the diseases that are caused by respirable silica overexposure.
    • Describe the methods to limit exposure to respirable silica.

Part 2: Creating a Silica Exposure Control Plan
Description:

In this course you will learn how to create a silica exposure control plan, a mandatory component of the OSHA regulations for silica exposure. 

Learning Objectives:
    • Identify who is required to have a written silica exposure control plan.
    • Determine when a respirator is needed and how to properly incorporate respirator use into your exposure control plan.
    • Learn techniques for restricting access in order to limit exposure to silica on your job site.
    • Understand how to better control silica exposure during clean up and housekeeping procedures on the job. 

Part 3: Alternative Silica Exposure Control Procedures
Description:

When conventional exposure control procedures aren't possible, what can you do? This course details alternative silica exposure control procedures and how they protect people.

Learning Objectives:
    • Define when an alternative exposure control procedure is required.
    • Describe how these alternative exposure procedures protect people from over exposure to respirable crystalline silica.
    • Identify the tasks that are not covered in Table 1 that require alternative exposure control procedures
    • Calculate Permissible Exposure Levels based on variable daily exposure.

Continuing Education Credit:

This course has been approved by these organizations and associations.

Course Titles: Procore Safety Qualified: Managing Silica Exposure in Construction, Procore Safety Qualified: Creating a Silica Exposure Control Plan, Procore Safety Qualified: Alternative Silica Exposure Plan
Course Number: PC-330, PC-331, PC-332
Delivery Name: Procore Technologies
Curriculum Group Name: AIA Providers
Credit: 1 AIA LU each

Procore's Continuing Education courses may fulfill state licensing requirements. When a course is completed, a certificate of completion is provided. It is up to the construction professional to submit their certificates of completion to their state licensing board to request credit for participating in a Procore Continuing Education course. 

This course is a 2019 Construction Safety Week resource

Curriculum

  • Managing Silica Exposure in Construction
  • Managing Silica Exposure in Construction: Introduction
  • Defining the Hazard
  • Understanding Respirable Crystalline Silica
  • Quiz 1
  • Permissible Exposure Levels
  • Quiz 2
  • The Written Plan
  • Methods for Limiting Exposure
  • Quiz 3
  • Restrict Access
  • Engineering Controls
  • Quiz 4
  • Tasks Not in Table 1
  • Quiz 5
  • Training and Additional Considerations
  • Conclusion
  • Final Quiz
  • Creating a Silica Exposure Control Plan
  • Creating a Silica Exposure Control Plan: Introduction
  • Who Needs a Plan?
  • Quiz 1
  • Defining the Tasks
  • Quiz 2
  • Respirator Use
  • Quiz 3
  • The Competent Person
  • Quiz 4
  • Restricting Access During Operations
  • Clean-up and Housekeeping
  • Quiz 5
  • Training
  • Quiz 6
  • Conclusion
  • Final Quiz
  • Alternative Silica Exposure Control Procedures
  • Alternative Silica Exposure Control Procedures: Introduction
  • Understanding the Alternatives to Table 1
  • Quiz 1
  • Measuring Exposure Levels
  • Quiz 2
  • Using Existing Objective Data
  • Quiz 3
  • Pulling It All Together
  • Quiz 4
  • Conclusion
  • Final Quiz
  • Congratulations! You've completed a Procore Continuing Education course!
  • We want to hear from you!